How to import Draenei Children Fountain

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Draenei Children Fountain of the bundle Draenei Children Fountain. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Draenei Children Fountain.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing DraeneiFountain.mdx

Now Click the "Import File" Button:

Next select 'DraeneiFountain.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file DraeneiFountain.mdx.

Importing BE_FOUNTAIN_WATER03.BLP

Now Click the "Import File" Button:

Next select 'BE_FOUNTAIN_WATER03.BLP' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file BE_FOUNTAIN_WATER03.BLP:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file BE_FOUNTAIN_WATER03.BLP.

Importing DALARAN_FOUNTAINFLOOR_01.BLP

Now Click the "Import File" Button:

Next select 'DALARAN_FOUNTAINFLOOR_01.BLP' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file DALARAN_FOUNTAINFLOOR_01.BLP:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file DALARAN_FOUNTAINFLOOR_01.BLP.

Importing DALARAN_FOUNTAINPART_01.BLP

Now Click the "Import File" Button:

Next select 'DALARAN_FOUNTAINPART_01.BLP' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file DALARAN_FOUNTAINPART_01.BLP:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file DALARAN_FOUNTAINPART_01.BLP.

Importing draenei_water02.blp

Now Click the "Import File" Button:

Next select 'draenei_water02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draenei_water02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draenei_water02.blp.

Importing draeneichildrenfoutain01.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain01.blp.

Importing draeneichildrenfoutain02.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain02.blp.

Importing draeneichildrenfoutain03.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain03.blp.

Importing draeneichildrenfoutain04.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain04.blp.

Importing draeneichildrenfoutain05.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain05.blp.

Importing draeneichildrenfoutain06.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain06.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain06.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain06.blp.

Importing draeneichildrenfoutain07.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain07.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain07.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain07.blp.

Importing draeneichildrenfoutain08.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain08.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain08.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain08.blp.

Importing draeneichildrenfoutain09.blp

Now Click the "Import File" Button:

Next select 'draeneichildrenfoutain09.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file draeneichildrenfoutain09.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file draeneichildrenfoutain09.blp.

Importing WATERFOAMLOOP2.BLP

Now Click the "Import File" Button:

Next select 'WATERFOAMLOOP2.BLP' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file WATERFOAMLOOP2.BLP:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file WATERFOAMLOOP2.BLP.

Importing zangarlilypad01.blp

Now Click the "Import File" Button:

Next select 'zangarlilypad01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file zangarlilypad01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file zangarlilypad01.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: