• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Death Penalty v1.00.w3x
Variables
Initialization
Initialization
Spell
Death Penalty Cast
Death Penalty Away
Death Penalty Spin
Death Penalty Return
Enter map-specific custom script code below. This text will be included in the map script after variables are declared and before any trigger code.
Name Type is_array initial_value
Angles real Yes
Caster unit No
Damage real No
Distance real No
DummyUnit unit No
Hashtable hashtable No
IDHandle integer No
LoopsForASFX2 integer No
LoopVariable integer No
PenaltiesAway group No
PenaltiesReturn group No
PenaltiesSpin group No
PlaySFXInteger integer No
Point1 location No
Point2 location No
Point3 location No
SFXes integer No
Speed real No
Target unit No
Default melee game initialization for all players
Initialization
Events
Map initialization
Conditions
Actions
Visibility - Disable fog of war
Visibility - Disable black mask
Hashtable - Create a hashtable
Set Variable Set Hashtable = (Last created hashtable)
Death Penalty Cast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Death Penalty
Actions
-------- Stores Caster and Target into varibles --------
-------- From now on, I'll say 'Duo' instead of 'Caster and Target' --------
Set Variable Set Caster = (Triggering unit)
Set Variable Set Target = (Target unit of ability being cast)
-------- Counts total damage dealt --------
-------- NOTE 1: Set your damage here --------
Set Variable Set Damage = ((Max life of Target) x (0.10 + (0.05 x (Real((Level of Death Penalty for Caster))))))
Set Variable Set Damage = (Damage / 2.00)
-------- Sets number of black bolts, flying out and around the target, the 'Sins' --------
-------- NOTE 2: Change your sin number here --------
Set Variable Set SFXes = "7"
-------- Prepares angle variables for creating the Sins --------
Set Variable Set Angles[1] = (360.00 / (Real(SFXes)))
Set Variable Set Angles[2] = "0.00"
-------- Nulifies Distance variable --------
Set Variable Set Distance = "0.00"
-------- Finds Caster's Location and creates a Dummy unit there --------
Set Variable Set Point1 = (Position of Target)
Unit - Create 1 . Dummy Unit for (Owner of Caster) at Point1 facing Default building facing degrees
-------- Stores Dummy Unit and it's HandleID into variables --------
Set Variable Set DummyUnit = (Last created unit)
Set Variable Set IDHandle = (Key (Last created unit).)
-------- Causes Caster deal damage to Target, causing half of total damage --------
Unit - Cause Caster to damage Target , dealing Damage damage of attack type Spells and damage type Normal
-------- Stores necessary information into hashtable --------
-------- NOTE 3: All information is attached to the Dummy Unit --------
Hashtable - Save Handle Of Target as 0 of IDHandle in Hashtable .
Hashtable - Save Handle Of Caster as 1 of IDHandle in Hashtable .
Hashtable - Save Damage as 2 of IDHandle in Hashtable .
Hashtable - Save SFXes as 3 of IDHandle in Hashtable .
Hashtable - Save LoopsForASFX2 as 4 of IDHandle in Hashtable .
Hashtable - Save Distance as 5 of IDHandle in Hashtable .
-------- Creates Sins and stores them into hashtable --------
-------- NOTE 4: Change Sin's model in Object Editor, Unit named Sin --------
For each (Integer LoopVariable ) from 1 to SFXes , do (Actions)
Loop - Actions
Set Variable Set Point2 = (Point1 offset by 70.00 towards Angles[2] degrees.)
Unit - Create 1 . Sin for (Owner of Caster) at Point2 facing Default building facing degrees
Animation - Change (Last created unit) flying height to ((Current flying height of Target) + 70.00) at 0.00
Hashtable - Save Handle Of (Last created unit) as (5 + LoopVariable) of IDHandle in Hashtable .
Set Variable Set Angles[2] = (Angles[2] + Angles[1])
Custom script: call RemoveLocation(udg_Point2)
-------- Checks if there is any instace of spell in game. If not, turns the first part of spell --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesAway is empty) Equal to True
Then - Actions
Trigger - Turn on Death_Penalty_Away <gen>
Else - Actions
-------- Adds Dummy Unit to Dummy group, which controls sins going away from target --------
Unit Group - Add DummyUnit to PenaltiesAway
-------- Fixes the leak --------
Custom script: call RemoveLocation(udg_Point1)
Death Penalty Away
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Unit Group - Pick every unit in PenaltiesAway and do (Actions)
Loop - Actions
-------- Stores Dummy Unit's HandleID into variable --------
Set Variable Set IDHandle = (Key (Picked unit).)
-------- Loads number of sins --------
Set Variable Set SFXes = (Load 3 of IDHandle from Hashtable.)
-------- Sets Speed --------
Set Variable Set Speed = "35.00"
-------- Loads Sins' Distance to Target and increases it by Speed --------
Set Variable Set Distance = (Load 5 of IDHandle from Hashtable.)
Set Variable Set Distance = (Distance + Speed)
-------- Loads target and finds its location --------
Set Variable Set Target = (Load 0 of IDHandle in Hashtable.)
Set Variable Set Point1 = (Position of Target)
-------- Moves all Sins away from target by distance --------
For each (Integer LoopVariable ) from 1 to SFXes , do (Actions)
Loop - Actions
Set Variable Set DummyUnit = (Load (5 + LoopVariable) of IDHandle in Hashtable.)
Set Variable Set Point2 = (Position of DummyUnit)
Set Variable Set Point3 = (Point1 offset by Distance towards (Angle from Point1 to Point2) degrees.)
Unit - Move DummyUnit instantly to Point3
Custom script: call RemoveLocation(udg_Point2)
Custom script: call RemoveLocation(udg_Point3)
-------- Checks if it is time to start spinning the Sins --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Distance Less than or equal to 600.00
Then - Actions
-------- If not, updates the Distance --------
Hashtable - Save Distance as 5 of IDHandle in Hashtable .
Else - Actions
-------- If it is, switches Dummy Unit's group from -Away to -Spin --------
Unit Group - Remove (Picked unit) from PenaltiesAway .
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesAway is empty) Equal to True
Then - Actions
Trigger - Turn off (This trigger)
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesSpin is empty) Equal to True
Then - Actions
Trigger - Turn on Death_Penalty_Spin <gen>
Else - Actions
Unit Group - Add (Picked unit) to PenaltiesSpin
-------- Fixes the leak --------
Custom script: call RemoveLocation(udg_Point1)
Death Penalty Spin
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Unit Group - Pick every unit in PenaltiesSpin and do (Actions)
Loop - Actions
-------- Loads Dummy's HandleID --------
Set Variable Set IDHandle = (Key (Picked unit).)
-------- Loads number of Sins --------
Set Variable Set SFXes = (Load 3 of IDHandle from Hashtable.)
-------- Loads loops needed for next SFX closing to the Target and increases it by 1 (current loop) --------
Set Variable Set LoopsForASFX2 = (Load 4 of IDHandle from Hashtable.)
Set Variable Set LoopsForASFX2 = (LoopsForASFX2 + 1)
-------- Sets number of loops needed to play the SFX --------
-------- NOTE 1: Set your Loops needed for sfx here --------
Set Variable Set PlaySFXInteger = "5"
-------- Loads Sins' Distance to Target --------
Set Variable Set Distance = (Load 5 of IDHandle from Hashtable.)
-------- Loads target and finds its location --------
Set Variable Set Target = (Load 0 of IDHandle in Hashtable.)
Set Variable Set Point1 = (Position of Target)
-------- Sets spinning speed --------
-------- NOTE 1: Set your spinning speed here --------
Set Variable Set Speed = "5.00"
-------- Spins all Sins and plays Closing animations if needed --------
For each (Integer LoopVariable ) from 1 to SFXes , do (Actions)
Loop - Actions
Set Variable Set DummyUnit = (Load (5 + LoopVariable) of IDHandle in Hashtable.)
Set Variable Set Point2 = (Position of DummyUnit)
Set Variable Set Point3 = (Point1 offset by 600.00 towards ((Angle from Point1 to Point2) + Speed) degrees.)
Unit - Move DummyUnit instantly to Point3
Custom script: call RemoveLocation(udg_Point3)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
LoopsForASFX2 Equal to PlaySFXInteger
Then - Actions
Set Variable Set Point3 = (Point1 offset by Distance towards ((Angle from Point1 to Point2) + (Real((Custom value of (Picked unit))))) degrees.)
-------- NOTE 2: Change your SFX played HERE! --------
Special Effect - Create a special effect at Point3 using Abilities\Spells\Undead\OrbOfDeath\AnnihilationMissile.mdl
Special Effect - Destroy (Last created special effect)
Else - Actions
Custom script: call RemoveLocation(udg_Point2)
Custom script: call RemoveLocation(udg_Point3)
-------- If it was time to play the closing SFX, increases Custom Value of Dummy Unit and resets the Timer of Loops --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
LoopsForASFX2 Equal to PlaySFXInteger
Then - Actions
Unit - Set the custom value of (Picked unit) to ((Custom value of (Picked unit)) + 40)
Set Variable Set LoopsForASFX2 = "0"
Set Variable Set Distance = (Distance - 50.00)
Hashtable - Save Distance as 5 of IDHandle in Hashtable .
Else - Actions
-------- Updates the Loops made --------
Hashtable - Save LoopsForASFX2 as 4 of IDHandle in Hashtable .
-------- Checks if it is time for last part of spell --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Distance Less than 0.00
Then - Actions
-------- If it is... --------
-------- Resets distance --------
Hashtable - Save 600.00 as 5 of IDHandle in Hashtable .
-------- Creates an ending SFX on target --------
-------- NOTE 3: Change your ending SFX here --------
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of Target using Abilities\Spells\Undead\DarkRitual\DarkRitualTarget.mdl
Special Effect - Destroy (Last created special effect)
-------- Changes Dummy's Group from -Spin to -Return --------
Unit Group - Remove (Picked unit) from PenaltiesSpin .
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesSpin is empty) Equal to True
Then - Actions
Trigger - Turn off (This trigger)
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesReturn is empty) Equal to True
Then - Actions
Trigger - Turn on Death_Penalty_Return <gen>
Else - Actions
Unit Group - Add (Picked unit) to PenaltiesReturn
Else - Actions
-------- Fixes the leak --------
Custom script: call RemoveLocation(udg_Point1)
Death Penalty Return
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Unit Group - Pick every unit in PenaltiesReturn and do (Actions)
Loop - Actions
-------- Stores Dummy's HandleID into variable --------
Set Variable Set IDHandle = (Key (Picked unit).)
-------- Loads the Duo --------
Set Variable Set Target = (Load 0 of IDHandle in Hashtable.)
Set Variable Set Caster = (Load 1 of IDHandle in Hashtable.)
-------- Loads the Number of Sins --------
Set Variable Set SFXes = (Load 3 of IDHandle from Hashtable.)
-------- Sets Speed of returning --------
-------- NOTE 1: Change your return speed here --------
Set Variable Set Speed = "35.00"
-------- Loads Sins' Distance to Target and reduces it by Speed --------
Set Variable Set Distance = (Load 5 of IDHandle from Hashtable.)
Set Variable Set Distance = (Distance - Speed)
-------- Finds Target's Location --------
Set Variable Set Point1 = (Position of Target)
-------- Moves all Sins --------
For each (Integer LoopVariable ) from 1 to SFXes , do (Actions)
Loop - Actions
Set Variable Set DummyUnit = (Load (5 + LoopVariable) of IDHandle in Hashtable.)
Set Variable Set Point2 = (Position of DummyUnit)
Set Variable Set Point3 = (Point1 offset by Distance towards (Angle from Point1 to Point2) degrees.)
Unit - Move DummyUnit instantly to Point3
Custom script: call RemoveLocation(udg_Point2)
Custom script: call RemoveLocation(udg_Point3)
-------- Checks if it is time to finish the spell --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Distance Less than or equal to 0.00
Then - Actions
-------- If it is... --------
-------- Kills all Sins --------
For each (Integer LoopVariable ) from 1 to SFXes , do (Actions)
Loop - Actions
Set Variable Set DummyUnit = (Load (5 + LoopVariable) of IDHandle in Hashtable.)
Unit - Kill DummyUnit
-------- Creates an Impact SFX on target --------
-------- NOTE 2: Change your impact animation here --------
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of Target using Abilities\Spells\Undead\DeathCoil\DeathCoilSpecialArt.mdl
Special Effect - Destroy (Last created special effect)
-------- Loads Damage-to-Deal and causes Caster to damage Target --------
Set Variable Set Damage = (Load 2 of IDHandle from Hashtable.)
Unit - Cause Caster to damage Target , dealing Damage damage of attack type Spells and damage type Normal
-------- Fixes the Dummy Unit and removes it from game --------
Hashtable - Clear all child hashtables of child IDHandle in Hashtable .
Unit Group - Remove (Picked unit) from PenaltiesReturn .
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(PenaltiesReturn is empty) Equal to True
Then - Actions
Trigger - Turn off (This trigger)
Else - Actions
Unit - Remove (Picked unit) from the game
Else - Actions
-------- If not, updates the distance --------
Hashtable - Save Distance as 5 of IDHandle in Hashtable .
-------- Fixes the Leak --------
Custom script: call RemoveLocation(udg_Point1)
Top