• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Dat Chain Exp Systemv2.w3x
Variables
Dat Chain Exp System
localplayer
---------------------------
Dat CES ini
Dat CES Raise
Dat CES Lower
Dat CES New Unit Enters Map
Dat CES Clear Unit
Instructions
Name Type is_array initial_value
Dat_CES_ComboTrack integer Yes
Dat_CES_CurrentExpRate real Yes
Dat_CES_DefaultExpRate real Yes
Dat_CES_PlayerCheck force No
Dat_CES_ShowTimer timer Yes
Dat_CES_ShowTimerWindow timerdialog Yes
Dat_CES_System group No
Dat_CES_tExpRateLower real Yes
Dat_CES_tExpRateRise real Yes
Dat_GlobalTimer timer No
DatTable hashtable No
GetLocalPlayer player No
tempinteger integer No
tempinteger2 integer No
tempplayer player No
tempreal real No
tempstring string No
tempunit unit No
localplayer
Events
Map initialization
Conditions
Actions
Custom script: set udg_GetLocalPlayer = GetLocalPlayer()
Dat CES ini
Events
Time - Elapsed game time is 1.00 seconds
Conditions
Actions
-------- For units that aren't here at the start of the map go to "Dat CES New Unit Enters Map". --------
-------- We do this so you can decide if you want to filter out any units you don't want to be affected by this system. --------
-------- Add an if condition to filter out units when picking them. --------
-------- I already made one as an example, it is currently disabled so just re-enable it and edit it. --------
Unit Group - Pick every unit in (Units in (Playable map area)) and do (Actions)
Loop - Actions
Set Variable Set tempunit = (Picked unit)
-------- You might want to figure out to use something like a loop if you want to filter out more then 10 units. --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Unit-type of tempunit) Not equal to Phoenix
Then - Actions
Unit Group - Add tempunit to Dat_CES_System
Else - Actions
-------- This is where we start our timer for lowering the EXP rate back to normal/default. --------
-------- If you want to edit it then just replace 0.031200 only with whatever number you want. --------
-------- You can make it higher however this is the lowest it should go because any lower and you likely can't/won't notice any visual differences unless you have really good eyes.... Like if your superhuman then it isn't fair to WC3. --------
Custom script: call TimerStart(udg_Dat_GlobalTimer, 0.031200, true, null)
-------- All Players doesn't leak a player group so we're fine and can catch everyone playing. --------
Player Group - Pick every player in (All players) and do (Actions)
Loop - Actions
-------- The names of the variables/functions should be clear enough for you, if they're not then please post in the thread for this system and let me know. --------
Set Variable Set tempplayer = (Picked player)
Set Variable Set tempinteger = (Player number of tempplayer)
Set Variable Set Dat_CES_DefaultExpRate[tempinteger] = "100.00"
Hero - Make tempplayer Heroes gain Dat_CES_DefaultExpRate[tempinteger] % experience from future kills
Set Variable Set Dat_CES_CurrentExpRate[tempinteger] = Dat_CES_DefaultExpRate[tempinteger]
Set Variable Set Dat_CES_tExpRateRise[tempinteger] = "10.00"
Set Variable Set Dat_CES_tExpRateLower[tempinteger] = "0.50"
-------- Don't touch below --------
Countdown Timer - Start Dat_CES_ShowTimer[tempinteger] as a One-shot timer that will expire in 0.01 seconds
Countdown Timer - Pause Dat_CES_ShowTimer[tempinteger]
Countdown Timer - Create a timer window for Dat_CES_ShowTimer[tempinteger] with title ((Name of tempplayer) + 's EXP Rate:)
Set Variable Set Dat_CES_ShowTimerWindow[tempinteger] = (Last created timer window)
Countdown Timer - Change the color of the time for Dat_CES_ShowTimerWindow[tempinteger] to ( 0.00 %, 0.00 %, 0.00 %) with 100.00 % transparency
Countdown Timer - Hide Dat_CES_ShowTimerWindow[tempinteger]
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
GetLocalPlayer Equal to tempplayer
Then - Actions
Countdown Timer - Show Dat_CES_ShowTimerWindow[tempinteger]
Else - Actions
Dat CES Raise
Events
Unit - A unit Dies
Conditions
Actions
-------- There is really no reason for anyone to have to edit this, everything is in "Dat CES ini". --------
Set Variable Set tempunit = (Triggering unit)
-------- If the unit isn't in this group then it isn't in the system and is filtered out. --------
-------- Which means to skip this instance/run and move onto the next unit. --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(tempunit is in Dat_CES_System.) Equal to False
Then - Actions
Skip remaining actions
Else - Actions
Set Variable Set tempunit = (Killing unit)
Set Variable Set tempplayer = (Owner of tempunit)
Set Variable Set tempinteger = (Player number of tempplayer)
Set Variable Set tempreal = (Dat_CES_CurrentExpRate[tempinteger] + Dat_CES_tExpRateRise[tempinteger])
Set Variable Set Dat_CES_CurrentExpRate[tempinteger] = tempreal
Hero - Make tempplayer Heroes gain Dat_CES_CurrentExpRate[tempinteger] % experience from future kills
Set Variable Set Dat_CES_ComboTrack[tempinteger] = (Dat_CES_ComboTrack[tempinteger] + 1)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(tempplayer is in Dat_CES_PlayerCheck.) Equal to False
Then - Actions
Player Group - Add tempplayer to Dat_CES_PlayerCheck
Else - Actions
Dat CES Lower
Events
Time - Dat_GlobalTimer expires
Conditions
(Number of players in Dat_CES_PlayerCheck) Greater than 0
Actions
-------- There is really no reason for anyone to have to edit this, everything is in "Dat CES ini". --------
Player Group - Pick every player in Dat_CES_PlayerCheck and do (Actions)
Loop - Actions
Set Variable Set tempplayer = (Picked player)
Set Variable Set tempinteger = (Player number of tempplayer)
Set Variable Set tempinteger2 = Dat_CES_ComboTrack[tempinteger]
Set Variable Set tempreal = (Dat_CES_CurrentExpRate[tempinteger] - Dat_CES_tExpRateLower[tempinteger])
Set Variable Set Dat_CES_CurrentExpRate[tempinteger] = tempreal
Set Variable Set tempstring = ( + (EXP Rate: + (((String((Integer(tempreal)))) + %) + ( | Combo: + (String(tempinteger2))))))
Countdown Timer - Change the title of Dat_CES_ShowTimerWindow[tempinteger] to tempstring
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Dat_CES_CurrentExpRate[tempinteger] Less than or equal to Dat_CES_DefaultExpRate[tempinteger]
Then - Actions
Set Variable Set Dat_CES_ComboTrack[tempinteger] = "0"
Set Variable Set tempreal = Dat_CES_DefaultExpRate[tempinteger]
Set Variable Set tempstring = ( + (EXP Rate: + (((String((Integer(tempreal)))) + %) + | Combo: 0)))
Countdown Timer - Change the title of Dat_CES_ShowTimerWindow[tempinteger] to tempstring
Hero - Make tempplayer Heroes gain tempreal % experience from future kills
Player Group - Remove tempplayer from Dat_CES_PlayerCheck .
Else - Actions
Hero - Make tempplayer Heroes gain Dat_CES_CurrentExpRate[tempinteger] % experience from future kills
Dat CES New Unit Enters Map
Events
Unit - A unit enters (Playable map area)
Conditions
((Triggering unit) is in Dat_CES_System.) Not equal to True
Actions
Set Variable Set tempunit = (Triggering unit)
-------- We do this so you can decide if you want to filter out any units you don't want to be affected by this system. --------
-------- Add an if condition to filter out units when picking them. --------
-------- I already made one as an example, it is currently disabled so just re-enable it and edit it. --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Unit-type of tempunit) Equal to Phoenix
Then - Actions
Skip remaining actions
Else - Actions
Unit Group - Add tempunit to Dat_CES_System
This might bug on spells that can revive/animate your units in-game so you will have to either fix it yourself or contact me to help fix it and add a way around it. Remeber to contact me on www.hiveworkshop.com in my visitor page. I'm Dat-C3
Dat CES Clear Unit
Events
Unit - A unit Dies
Conditions
((Triggering unit) is in Dat_CES_System.) Equal to True
Actions
-------- We remove the unit so it isn't taking up space in the group when its removed. --------
Set Variable Set tempunit = (Triggering unit)
Unit Group - Remove tempunit from Dat_CES_System .
Go into the terrain editor first, File --> Preferences --> General --> Make sure "Automatically create unknown variables while pasting trigger data" is checkmarked.

Right-click Dat Chain Exp System which is the folder/category below the map icon then click copy then open your map and then open your trigger editor in your map where you click paste pretty much anywhere in the left side where the triggers and everything are. Tuh da! You now have a really cool chain EXP/kill system that also has a combo system with it letting you make hero's or maps where you have the chain feature, best used in arena genre type maps.

To fix any bugs/errors upon pasting my system into your map here is what you do:

Copy the folder again then delete it, go into your variable manager/editer where you find any variables that lie about their type. It will usually be an integer that messes up. Just click on it and set its value to the correct type then re-paste the folder/system back in and it should work perfectly.
Top