• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Cursed Tower Death Animation

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Cursed Tower Death Animation of the bundle Cursed Tower Death Animation. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Forsaken Tower Reforged.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds
Forsaken_ScoutTower_Emissive.dds

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing ForsakenCursedTowerReforgedDeath.mdx

Now Click the "Import File" Button:

Next select 'ForsakenCursedTowerReforgedDeath.mdx' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx

Done, you have imported the file ForsakenCursedTowerReforgedDeath.mdx.

Importing Forsaken_CursedTower_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Forsaken_CursedTower_Diffuse.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_Diffuse.dds

Double-click the file Forsaken_CursedTower_Diffuse.dds:

Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_Diffuse.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds

Done, you have imported the file Forsaken_CursedTower_Diffuse.dds.

Importing Forsaken_CursedTower_Emissive.dds

Now Click the "Import File" Button:

Next select 'Forsaken_CursedTower_Emissive.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
war3mapimported/Forsaken_CursedTower_Emissive.dds

Double-click the file Forsaken_CursedTower_Emissive.dds:

Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
war3mapimported/Forsaken_CursedTower_Emissive.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds

Done, you have imported the file Forsaken_CursedTower_Emissive.dds.

Importing Forsaken_CursedTower_Normal.dds

Now Click the "Import File" Button:

Next select 'Forsaken_CursedTower_Normal.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_Normal.dds

Double-click the file Forsaken_CursedTower_Normal.dds:

Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_Normal.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds

Done, you have imported the file Forsaken_CursedTower_Normal.dds.

Importing Forsaken_CursedTower_ORM.dds

Now Click the "Import File" Button:

Next select 'Forsaken_CursedTower_ORM.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_ORM.dds

Double-click the file Forsaken_CursedTower_ORM.dds:

Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
war3mapimported/Forsaken_CursedTower_ORM.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds

Done, you have imported the file Forsaken_CursedTower_ORM.dds.

Importing Forsaken_ScoutTower_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Forsaken_ScoutTower_Diffuse.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
war3mapimported/Forsaken_ScoutTower_Diffuse.dds

Double-click the file Forsaken_ScoutTower_Diffuse.dds:

Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
war3mapimported/Forsaken_ScoutTower_Diffuse.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds

Done, you have imported the file Forsaken_ScoutTower_Diffuse.dds.

Importing Forsaken_ScoutTower_Emissive.dds

Now Click the "Import File" Button:

Next select 'Forsaken_ScoutTower_Emissive.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
war3mapimported/Forsaken_ScoutTower_Emissive.dds

Double-click the file Forsaken_ScoutTower_Emissive.dds:

Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
war3mapimported/Forsaken_ScoutTower_Emissive.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds

Done, you have imported the file Forsaken_ScoutTower_Emissive.dds.

Importing Forsaken_ScoutTower_Normal.dds

Now Click the "Import File" Button:

Next select 'Forsaken_ScoutTower_Normal.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
war3mapimported/Forsaken_ScoutTower_Normal.dds

Double-click the file Forsaken_ScoutTower_Normal.dds:

Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
war3mapimported/Forsaken_ScoutTower_Normal.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
Forsaken_ScoutTower_Normal.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
Forsaken_ScoutTower_Normal.dds

Done, you have imported the file Forsaken_ScoutTower_Normal.dds.

Importing Forsaken_ScoutTower_ORM.dds

Now Click the "Import File" Button:

Next select 'Forsaken_ScoutTower_ORM.dds' in the folder which you extracted from the zip archive:

Cursed Tower Death Animation
ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds
Image / Texture
5,461
war3mapimported/Forsaken_ScoutTower_ORM.dds

Double-click the file Forsaken_ScoutTower_ORM.dds:

Forsaken_ScoutTower_ORM.dds
Image / Texture
5,461
war3mapimported/Forsaken_ScoutTower_ORM.dds

Tick the box "Use Custom Path" and type in the correct path:

Forsaken_ScoutTower_ORM.dds
Image / Texture
5,461
Forsaken_ScoutTower_ORM.dds

The file has been properly added to the map archive:

ForsakenCursedTowerReforgedDeath.mdx
Model
1,030
war3mapimported/ForsakenCursedTowerReforgedDeath.mdx
Forsaken_CursedTower_Diffuse.dds
Image / Texture
5,461
Forsaken_CursedTower_Diffuse.dds
Forsaken_CursedTower_Emissive.dds
Image / Texture
2,731
Forsaken_CursedTower_Emissive.dds
Forsaken_CursedTower_Normal.dds
Image / Texture
5,461
Forsaken_CursedTower_Normal.dds
Forsaken_CursedTower_ORM.dds
Image / Texture
5,461
Forsaken_CursedTower_ORM.dds
Forsaken_ScoutTower_Diffuse.dds
Image / Texture
2,731
Forsaken_ScoutTower_Diffuse.dds
Forsaken_ScoutTower_Emissive.dds
Image / Texture
2,731
Forsaken_ScoutTower_Emissive.dds
Forsaken_ScoutTower_Normal.dds
Image / Texture
5,461
Forsaken_ScoutTower_Normal.dds
Forsaken_ScoutTower_ORM.dds
Image / Texture
5,461
Forsaken_ScoutTower_ORM.dds

Done, you have imported the file Forsaken_ScoutTower_ORM.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top