How to import CSW - Orc Stronghold (T2)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model CSW - Orc Stronghold (T2) of the bundle CSW - Orc Stronghold (T2). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file CSW - Orc Great Hall ( Upgrades).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing WC2GreatHallTier2.mdx

Now Click the "Import File" Button:

Next select 'WC2GreatHallTier2.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file WC2GreatHallTier2.mdx.

Importing GreatHall_Diffuse.dds

Now Click the "Import File" Button:

Next select 'GreatHall_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHall_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHall_Diffuse.dds.

Importing GreatHall_Emissive.dds

Now Click the "Import File" Button:

Next select 'GreatHall_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHall_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHall_Emissive.dds.

Importing GreatHall_Normal.dds

Now Click the "Import File" Button:

Next select 'GreatHall_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHall_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHall_Normal.dds.

Importing GreatHall_ORM.dds

Now Click the "Import File" Button:

Next select 'GreatHall_ORM.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHall_ORM.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHall_ORM.dds.

Importing GreatHallGround_Diffuse.dds

Now Click the "Import File" Button:

Next select 'GreatHallGround_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHallGround_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHallGround_Diffuse.dds.

Importing GreatHallGround_Normal.dds

Now Click the "Import File" Button:

Next select 'GreatHallGround_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHallGround_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHallGround_Normal.dds.

Importing GreatHallGround_ORM.dds

Now Click the "Import File" Button:

Next select 'GreatHallGround_ORM.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file GreatHallGround_ORM.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file GreatHallGround_ORM.dds.

Importing Stronghold_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Stronghold_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Stronghold_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Stronghold_Diffuse.dds.

Importing Stronghold_Normal.dds

Now Click the "Import File" Button:

Next select 'Stronghold_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Stronghold_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Stronghold_Normal.dds.

Importing Stronghold_ORM.dds

Now Click the "Import File" Button:

Next select 'Stronghold_ORM.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Stronghold_ORM.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Stronghold_ORM.dds.

Importing StrongholdRocks_Diffuse.dds

Now Click the "Import File" Button:

Next select 'StrongholdRocks_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file StrongholdRocks_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file StrongholdRocks_Diffuse.dds.

Importing StrongholdRocks_Normal.dds

Now Click the "Import File" Button:

Next select 'StrongholdRocks_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file StrongholdRocks_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file StrongholdRocks_Normal.dds.

Importing StrongholdRocks_ORM.dds

Now Click the "Import File" Button:

Next select 'StrongholdRocks_ORM.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file StrongholdRocks_ORM.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file StrongholdRocks_ORM.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: