How to import Blackrock Mountain + UBRS & LBRS (Entire Interior)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Blackrock Mountain + UBRS & LBRS (Entire Interior) of the bundle Blackrock Mountain + UBRS & LBRS (Entire Interior). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Blackrock Mountain UBRS (Entire Interior).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing UpperBlackrockSpire.mdx

Now Click the "Import File" Button:

Next select 'UpperBlackrockSpire.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file UpperBlackrockSpire.mdx.

Importing 6du_bkfoundry_brackets.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_brackets.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_brackets.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_brackets.blp.

Importing 6du_bkfoundry_brackets_v4.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_brackets_v4.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_brackets_v4.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_brackets_v4.blp.

Importing 6du_bkfoundry_caveceiling01.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_caveceiling01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_caveceiling01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_caveceiling01.blp.

Importing 6du_bkfoundry_cavewall.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_cavewall.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_cavewall.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_cavewall.blp.

Importing 6du_bkfoundry_floorgrate.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_floorgrate.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_floorgrate.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_floorgrate.blp.

Importing 6du_bkfoundry_metal01.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_metal01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_metal01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_metal01.blp.

Importing 6du_bkfoundry_metalrail.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_metalrail.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_metalrail.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_metalrail.blp.

Importing 6du_bkfoundry_overlappedwood.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_overlappedwood.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_overlappedwood.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_overlappedwood.blp.

Importing 6du_bkfoundry_sheetmetal.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_sheetmetal.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_sheetmetal.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_sheetmetal.blp.

Importing 6du_bkfoundry_tunnelsupport.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_tunnelsupport.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_tunnelsupport.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_tunnelsupport.blp.

Importing 6du_bkfoundry_wooddeck.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_wooddeck.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_wooddeck.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_wooddeck.blp.

Importing 6du_bkfoundry_woodenbeams.blp

Now Click the "Import File" Button:

Next select '6du_bkfoundry_woodenbeams.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6du_bkfoundry_woodenbeams.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6du_bkfoundry_woodenbeams.blp.

Importing 6ih_ironhorde_brackets_01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_brackets_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_brackets_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_brackets_01.blp.

Importing 6ih_ironhorde_door_01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_door_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_door_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_door_01.blp.

Importing 6ih_ironhorde_stairs_02.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_stairs_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_stairs_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_stairs_02.blp.

Importing 6ih_ironhorde_trims_01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_trims_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_trims_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_trims_01.blp.

Importing 6ih_ironhorde_trims_02.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_trims_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_trims_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_trims_02.blp.

Importing 6ih_ironhorde_trims_03.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_trims_03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_trims_03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_trims_03.blp.

Importing 6ih_ironhorde_trims_04.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_trims_04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_trims_04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_trims_04.blp.

Importing 6ih_ironhorde_wooddeck_01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_wooddeck_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_wooddeck_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_wooddeck_01.blp.

Importing blackrockchain.blp

Now Click the "Import File" Button:

Next select 'blackrockchain.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockchain.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockchain.blp.

Importing blackrockdarkironbanner01.blp

Now Click the "Import File" Button:

Next select 'blackrockdarkironbanner01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockdarkironbanner01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockdarkironbanner01.blp.

Importing blackrockdarkironbanner02.blp

Now Click the "Import File" Button:

Next select 'blackrockdarkironbanner02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockdarkironbanner02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockdarkironbanner02.blp.

Importing blackrockdarkironbanner03.blp

Now Click the "Import File" Button:

Next select 'blackrockdarkironbanner03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockdarkironbanner03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockdarkironbanner03.blp.

Importing blackrockorcbanner01.blp

Now Click the "Import File" Button:

Next select 'blackrockorcbanner01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockorcbanner01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockorcbanner01.blp.

Importing blackrockorcbanner03.blp

Now Click the "Import File" Button:

Next select 'blackrockorcbanner03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file blackrockorcbanner03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file blackrockorcbanner03.blp.

Importing bm_blkrk_door01.blp

Now Click the "Import File" Button:

Next select 'bm_blkrk_door01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_blkrk_door01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_blkrk_door01.blp.

Importing bm_brspire_bigpillar01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_bigpillar01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_bigpillar01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_bigpillar01.blp.

Importing bm_brspire_catwalk01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_catwalk01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_catwalk01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_catwalk01.blp.

Importing bm_brspire_ceiling01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_ceiling01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_ceiling01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_ceiling01.blp.

Importing bm_brspire_ceiling03.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_ceiling03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_ceiling03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_ceiling03.blp.

Importing bm_brspire_chain01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_chain01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_chain01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_chain01.blp.

Importing bm_brspire_chapelwall01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_chapelwall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_chapelwall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_chapelwall01.blp.

Importing bm_brspire_dirtfloor01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_dirtfloor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_dirtfloor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_dirtfloor01.blp.

Importing bm_brspire_hallceiling01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_hallceiling01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_hallceiling01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_hallceiling01.blp.

Importing bm_brspire_hallfloor01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_hallfloor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_hallfloor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_hallfloor01.blp.

Importing bm_brspire_hallfloor02.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_hallfloor02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_hallfloor02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_hallfloor02.blp.

Importing bm_brspire_hammer01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_hammer01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_hammer01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_hammer01.blp.

Importing bm_brspire_lavarock01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_lavarock01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_lavarock01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_lavarock01.blp.

Importing bm_brspire_maindoor01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_maindoor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_maindoor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_maindoor01.blp.

Importing bm_brspire_metalbars.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_metalbars.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_metalbars.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_metalbars.blp.

Importing bm_brspire_metalhead01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_metalhead01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_metalhead01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_metalhead01.blp.

Importing bm_brspire_pillar01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_pillar01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_pillar01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_pillar01.blp.

Importing bm_brspire_ramptile01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_ramptile01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_ramptile01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_ramptile01.blp.

Importing bm_brspire_rockflr01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_rockflr01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_rockflr01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_rockflr01.blp.

Importing bm_brspire_rockwall01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_rockwall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_rockwall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_rockwall01.blp.

Importing bm_brspire_rockwall02.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_rockwall02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_rockwall02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_rockwall02.blp.

Importing bm_brspire_rockwall03.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_rockwall03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_rockwall03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_rockwall03.blp.

Importing bm_brspire_rubble01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_rubble01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_rubble01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_rubble01.blp.

Importing bm_brspire_runes01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_runes01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_runes01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_runes01.blp.

Importing bm_brspire_statue01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_statue01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_statue01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_statue01.blp.

Importing bm_brspire_steamvent01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_steamvent01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_steamvent01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_steamvent01.blp.

Importing bm_brspire_stnfloor01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnfloor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnfloor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnfloor01.blp.

Importing bm_brspire_stnwall01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnwall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnwall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnwall01.blp.

Importing bm_brspire_stnwall02.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnwall02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnwall02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnwall02.blp.

Importing bm_brspire_stnwall03.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnwall03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnwall03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnwall03.blp.

Importing bm_brspire_stnwall04.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnwall04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnwall04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnwall04.blp.

Importing bm_brspire_stnwall06.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_stnwall06.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_stnwall06.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_stnwall06.blp.

Importing bm_brspire_tileflr01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_tileflr01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_tileflr01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_tileflr01.blp.

Importing bm_brspire_trim01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_trim01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_trim01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_trim01.blp.

Importing bm_brspire_trim02.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_trim02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_trim02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_trim02.blp.

Importing bm_brspire_trim03.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_trim03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_trim03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_trim03.blp.

Importing bm_brspire_trim04.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_trim04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_trim04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_trim04.blp.

Importing bm_brspire_trim05.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_trim05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_trim05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_trim05.blp.

Importing bm_brspire_windows01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_windows01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_windows01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_windows01.blp.

Importing burningsteppslava02.blp

Now Click the "Import File" Button:

Next select 'burningsteppslava02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file burningsteppslava02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file burningsteppslava02.blp.

Importing jlo_mcaveex_rock2.blp

Now Click the "Import File" Button:

Next select 'jlo_mcaveex_rock2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_mcaveex_rock2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_mcaveex_rock2.blp.

Importing mm_ogrmr_trim_01.blp

Now Click the "Import File" Button:

Next select 'mm_ogrmr_trim_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_ogrmr_trim_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_ogrmr_trim_01.blp.

Importing mm_ogrmr_trim_02.blp

Now Click the "Import File" Button:

Next select 'mm_ogrmr_trim_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_ogrmr_trim_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_ogrmr_trim_02.blp.

Importing mm_ogrmr_wall_03.blp

Now Click the "Import File" Button:

Next select 'mm_ogrmr_wall_03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_ogrmr_wall_03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_ogrmr_wall_03.blp.

Importing mm_orc_bkrint_trim_02.blp

Now Click the "Import File" Button:

Next select 'mm_orc_bkrint_trim_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_orc_bkrint_trim_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_orc_bkrint_trim_02.blp.

Importing mm_orc_bkrroof_02.blp

Now Click the "Import File" Button:

Next select 'mm_orc_bkrroof_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_orc_bkrroof_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_orc_bkrroof_02.blp.

Importing mm_orc_bkrtrim_01.blp

Now Click the "Import File" Button:

Next select 'mm_orc_bkrtrim_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_orc_bkrtrim_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_orc_bkrtrim_01.blp.

Importing mm_orc_bkrtrim_02.blp

Now Click the "Import File" Button:

Next select 'mm_orc_bkrtrim_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_orc_bkrtrim_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_orc_bkrtrim_02.blp.

Importing mm_rope_01.blp

Now Click the "Import File" Button:

Next select 'mm_rope_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file mm_rope_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file mm_rope_01.blp.

Importing stormwindbarrel.blp

Now Click the "Import File" Button:

Next select 'stormwindbarrel.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file stormwindbarrel.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file stormwindbarrel.blp.

Importing stormwindcrate01.blp

Now Click the "Import File" Button:

Next select 'stormwindcrate01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file stormwindcrate01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file stormwindcrate01.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.