How to import Aranna Starseeker

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Aranna Starseeker of the bundle Aranna Starseeker. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Aranna Starseeker (Sponsored by Orphea).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing ArannaStarseeker.mdx

Now Click the "Import File" Button:

Next select 'ArannaStarseeker.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker.mdx.

Importing ArannaStarseeker_Armor_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Armor_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Armor_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Armor_Diffuse.dds.

Importing ArannaStarseeker_Armor_Normal.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Armor_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Armor_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Armor_Normal.dds.

Importing ArannaStarseeker_Belt_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Belt_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Belt_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Belt_Diffuse.dds.

Importing ArannaStarseeker_Boots_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Boots_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Boots_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Boots_Diffuse.dds.

Importing ArannaStarseeker_Hair_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Hair_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Hair_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Hair_Diffuse.dds.

Importing ArannaStarseeker_Horn_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Horn_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Horn_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Horn_Diffuse.dds.

Importing ArannaStarseeker_Horn_Emissive.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Horn_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Horn_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Horn_Emissive.dds.

Importing ArannaStarseeker_Main_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Main_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Main_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Main_Diffuse.dds.

Importing ArannaStarseeker_Main_Emissive.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Main_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Main_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Main_Emissive.dds.

Importing ArannaStarseeker_Main_Normal.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Main_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Main_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Main_Normal.dds.

Importing ArannaStarseeker_Main_Orm.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Main_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Main_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Main_Orm.dds.

Importing ArannaStarseeker_Weapon_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Weapon_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Weapon_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Weapon_Diffuse.dds.

Importing ArannaStarseeker_Weapon_Emissive.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Weapon_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Weapon_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Weapon_Emissive.dds.

Importing ArannaStarseeker_Weapondetails_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Weapondetails_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Weapondetails_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Weapondetails_Diffuse.dds.

Importing ArannaStarseeker_Weapondetails_Emissive.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseeker_Weapondetails_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseeker_Weapondetails_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseeker_Weapondetails_Emissive.dds.

Importing ArannaStarseekerDF_Armor_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseekerDF_Armor_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseekerDF_Armor_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseekerDF_Armor_Diffuse.dds.

Importing ArannaStarseekerDF_Belt_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseekerDF_Belt_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseekerDF_Belt_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseekerDF_Belt_Diffuse.dds.

Importing ArannaStarseekerDF_Horn_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseekerDF_Horn_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseekerDF_Horn_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseekerDF_Horn_Diffuse.dds.

Importing ArannaStarseekerDF_Main_Diffuse.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseekerDF_Main_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseekerDF_Main_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseekerDF_Main_Diffuse.dds.

Importing ArannaStarseekerDF_Main_Normal.dds

Now Click the "Import File" Button:

Next select 'ArannaStarseekerDF_Main_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ArannaStarseekerDF_Main_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ArannaStarseekerDF_Main_Normal.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.