Laboratory Indoors

[I34w90_238j]

Hi, I'm going to make a laboratory, what do I need for that? And how do I make the roof and walls and underground sewer-tunnels?
The laboratories I want to make are underground, so they'll be dark and old. There will also be sewers-like-tunnels linking them.
I'm quite disappointed at making laboratory roofs, props, and choosing walls or something round-like for tunnels that are also half filled with green water.
What can you suggest for making underground sewers and laboratories?

 

[~Void~]

Well the green water's pretty simple. Just use the WaterPlane.mdx from the UTM. As for circular pipes... well you're probably going to have to make them yourself... my best suggestion is taking two of the Arch:Cityscape Door doodads from the UTM and making one of them upside down and then placing another one right side up on top of it.

 

[Bu113t]

and the UTM has almost all of what you need, if you need reagents and alchemy stuff there is a pack on wc3c.net

 

[I34w90_238j]

Ok thanks, that helped me a lot. Now I'm going to look for something round and long that can have its walls visible from inside.

 

[Oziris]

like Pipes?

 

[I34w90_238j]

Yes I need two sided pipes.

EDIT: For canalization.

 

[madcd]

your other option is to make them . . or put a request to make them . . .
if what you want is simple you show me a picture to biuld them from i might even tell you if i can be bothered . . xD

 

[I34w90_238j]

Ok here is a picture of what I want a sewer to look like http://techyum.com/sewer.jpg
A second picture: http://www.riversides.org/websiteimages/sewer_400.jpg
And what a wall in a laboratory I want to look like should be: http://farm1.static.flickr.com/174/431176816_591ec5632e.jpg?v=0

I just want that sewers doodad from Cityscape, the sewers doodad, have its skin applied on both sides, or the inside, so when I move the camera in the sewers doodad, I can see its walls from inside. How to make that?

 

[madcd]

err you got to make a new model if you want it made you have to tell me what otehr textures you are useing or weather i should textuer it with in game textuers so ti dosnt look out of place

 

[I34w90_238j]

Ok I think I get it. I'll try to turn the sewer vent inside out and use Magos Editor to put its vertices on the same skin which is used, for example, by Doodads\Dungeon\Props\SewerVent\SewerVent0 model.
The problem is that it's two sided and I have to put the skin on the right side...

 

[madcd]

well give it a shot useing wc3 model editor you can attach multipul skins to it and apply it to both sides

 

[I34w90_238j]

Ok this is a pipe I just got. Now I'll "try" apply its outside skin to both sides.
And I have no idea about how to do that.

 

[madcd]

i hate to say it but your gonna have to hollow it out as blizzard have made ti a solid body

 

[I34w90_238j]

Well, if you're inside the pipe, then if the two-sided texture is placed only on its sides, but not on the exits, then from inside the pipe you won't see the exits but only the sides, so.. I just bitten out a half from the poor pipe and have to make new one..

EDIT: Done, the pipe is now two-sided, can be walked in. Here's the first version of it. and the second version is marked as SewerVent0Ver2, which has its exits open.

EDIT: I'm going to make a sewer... right now.. dark and with green water... and a marine in it.. for terrain purposes.

EDIT: the models don't work ingame. Going to requests section.

 

[madcd]

lol anoyingly that hapends alot have you tryed restarting your pc thos cos somtimes models that do work dont work for unexplicable reasons