Monitor problem

[elredir]

i have a problem with my monitor,a led samsung
it has a sort of white haze overlaying the image,i tried reducing the brightness but with no result
it's not so distinguishable when the image that he monitor displays has bright colors,but on darker colors,especially on black screens(like one the windows starting/loading screen)its very visible,
should i take the monitor back to the store or is there a solution?

one more thing,to adjust the monitors brightness,contrast,sharpness and all the other options i must use a program(magic tune),but in the compatibility section(on the download page of the program)i cant find my graphics card among the list of gpu supported,could this be whats causing the white haze?

[Gilles]

I would take it back if it's under warranty or call 800-SAMSUNG.

Are you sure you need to install the software? I have an older Samsung monitor and I certainly didn't install Magic Tune.

[elredir]

the monitor is still under warranty and i cant adjust anything without that program it doesnt have any buttons(only power),without the program it just auto-adjusts itself

[Gilles]

That seems like a poor design idea, but that's besides the point. I really doubt it's a comparability issue. I would simply take it back.

[Dr Super Good]

Its probably due to poor contrast. The "haze" you see in dark images is likly the back light shinning through because the LCD is not able to filter enough light out.

Displays with high contrast ratios exhibit this problem much less. OLED displays do not have this problem at all.

[Trojan_PwNeR]

Does it flash on startup and then go back?

[elredir]

@Dr Super Good: the monitor isn't LCD,it's LED and its contrast is quite high(DCR 5,000,000:1 (Static: 600:1)) my old monitor,which was LCD,didnt have this problem
@Trojan_PwNeR: no i doesnt flash an startup

[BlargHonk]

Is the haze brighter near the edges?

[elredir]

it gets brighter on the bottom of the screen but not by much

[BlargHonk]

Means the factory might've messed up with the edge borders that keep the backlight from shining around the edges.