SilverhandPaladin

Moderator · Oct 7, 2013

18:44, 24th Jan 2014
Kwaliti:

Performs well, but the colored metal parts are quite inconsistent. Approved nonetheless.

14:15, 7th Feb 2014
Deolrin:

Added rating.

missfairy · Oct 7, 2013

Very very nice!

infrenus · Oct 7, 2013

Wow. I never tought it was that low poly when I was watching you make it. Thats çpretty impressive to portray the paladin as the concept. 5/5

Gojira2000 · Oct 7, 2013

So are all 3 of these models in the file? (great models btw)

paladinjst · Oct 7, 2013

Gojira2000 said:
So are all 3 of these models in the file? (great models btw)

the other two models still need to fix . it won't be released right now

Kyrbi0 · Oct 7, 2013

Very impressive stuff. I've always loved good (read: Samwise Didier's) concept art being turned into great Wc3 Models, and this is an excellent example of that. Nice in-game textures.

Thumbs up.

paladinjst · Oct 7, 2013

Kyrbi0 said:
Very impressive stuff. I've always loved good (read: Samwise Didier's) concept art being turned into great Wc3 Models, and this is an excellent example of that. Nice in-game textures.

Thumbs up.

thanks ~ how is going on with ur custom race creation ? how many models have ur team done by now ? :ogre_haosis:

the proxy's raptor rider make me feel impressive . :thumbs_up:

TaShadan · Oct 7, 2013

awesome. Could you make a unit version of the paladin?

_lycan · Oct 7, 2013

models got great detail but don't look warcraft-ish so i would give them a 4/5

Kyrbi0 · Oct 7, 2013

paladinjst said:
thanks ~ how is going on with ur custom race creation ? how many models have ur team done by now ?
the proxy's raptor rider make me feel impressive .

Currently checking & writing up the response to your VM right now. Few more minutes

Also, forgot to say, but the beard is definitely better gray-ed out like that.

Blood Raven · Oct 7, 2013

DAT HAMMER. Seriously great job on the hammer. I think you should also release it as an attachment

The model overall just rocks 5/5

Though i'm not used to seeing paladin with a helmet

Sin'dorei300 · Oct 7, 2013

It's very close to the concept that the model's based on, well done!

crazzzytoo · Oct 7, 2013

Can't wait till you get the other two out they look amazing by the preview!!! And this one i love it!!! Good Job!

Footman16 · Oct 7, 2013

I'm looking forward to the Ashbringer; I'm glad someone finally took it upon themselves to give us these wonderful models and I must say they've been pulled off spectacularly I'll have to use them in-game to make the most of them for sure.

Sunreaver · Oct 7, 2013

Eyes are very evil please fix that

Footman16 · Oct 7, 2013

Feathermoon said:
Eyes are very evil please fix that

I reckon they're alright I mean Uther was a very hardened and determinded guy so I think the almost glaring look suits him quite well. That's just my opinion though.

L71292 · Oct 8, 2013

Damn! Man can you please make some more cool models like this? Please I really love to see more from your works 5 TUP!

vincilios · Oct 8, 2013

Fabulous hammer. If you create a model only of this hammer I really appreciate.

InfernalTater · Oct 8, 2013

The paladin is quite an overused model with so many edits it's not even funny, but this one looks great enough to be useful. The file size is a bit excessive, but that's necessary for something like this.

4/5.

Sellenisko · Oct 8, 2013

Future most downloaded model.of the month. Mark my words. 10/10.

Roland · Oct 8, 2013

i WANNA DOWNLOAD THIS WOO! ;D

paladinjst · Oct 8, 2013

Sellenisko said:
Future most downloaded model.of the month. Mark my words. 10/10.

thanks buddy . the most downloaded model is ur HQ Sylvanas . it can't be over by me .

Anknaton · Oct 8, 2013

Well... I like the style of the model... Looks awesomly good! Keep up with this style is different and nice! 5/5

HappyCockroach · Oct 8, 2013

the wrap work here is very good, but you have some colour scheme conflicts.

the blood-elven bronze armor don't fit with the gold details of the other one. i know you had to mash up both to give it the details you wanted, but in the future avoid using textures that conflict (choose whether gold or whether bronze, or a pattern in which they will occur that won't look accidental like in this model)
the undead textured hammer could fit the bronze, but it doesn't fit the gold.

and also, you don't need to have such high-res texture details, try to keep the whole model in the same resolution... (high res golden lion texture in the hammer and in the shoulder, next to low-res ones)

SMBComix · Oct 8, 2013

HappyCockroach said:
the wrap work here is very good, but you have some colour scheme conflicts.

the blood-elven bronze armor don't fit with the gold details of the other one. i know you had to mash up both to give it the details you wanted, but in the future avoid using textures that conflict (choose whether gold or whether bronze, or a pattern in which they will occur that won't look accidental like in this model)
the undead textured hammer could fit the bronze, but it doesn't fit the gold.

and also, you don't need to have such high-res texture details, try to keep the whole model in the same resolution... (high res golden lion texture in the hammer and in the shoulder, next to low-res ones)

This. But considering he most likely wanted this to be done using in-game textures only to reduce filesize, I think this is probably the best he could do under that circumstance. The model looks wicked awesome overall and I'll definitely be using this for my Warcraft 3 machinima over the built-in one.

WhiteDeath · Oct 8, 2013

Thing you should fix:
You forgot to add the hero glow to the hammer.
The arms intersect horribly with the shoulder pads in most animations, this will require some animating that might be difficult.
Add in some pupils, the paladin and Arthas's textures have some, it will make his eyes look less possessed mad man and more human.
The cloak starts out suddenly from the middle of his back, that looks weird.
He has iron pants, that must be hard to move in, but they do offer awesome protection for his junk.
Make the wings on his helm better - more detailed.
The lower mesh of the fore arm intersects with the upper mesh - it is visible even in the screen shot of the model - leave a little bit more distance between the two meshes.
The small parts of the cloak are connected to the bone of the arm - that is very weird.
Add some sort of trim at the end of the cloak and maybe to its sides, it will make it look better.
I suggest using the wings of the blood elf glue-screen texture for the wings on the shoulder.
Make the book a bit smaller.

Peacegetter · Oct 8, 2013

HappyCockroach said:
the wrap work here is very good, but you have some colour scheme conflicts.

the blood-elven bronze armor don't fit with the gold details of the other one. i know you had to mash up both to give it the details you wanted, but in the future avoid using textures that conflict (choose whether gold or whether bronze, or a pattern in which they will occur that won't look accidental like in this model)
the undead textured hammer could fit the bronze, but it doesn't fit the gold.

and also, you don't need to have such high-res texture details, try to keep the whole model in the same resolution... (high res golden lion texture in the hammer and in the shoulder, next to low-res ones)

Exactly my opinion, therefore just 4/5

Sellenisko · Oct 8, 2013

paladinjst said:
thanks buddy . the most downloaded model is ur HQ Sylvanas . it can't be over by me .

Few days, maybe a week and you will.

JollyD · Oct 8, 2013

very nice

Freddyk · Oct 8, 2013

WhiteDeath said:
Thing you should fix:
You forgot to add the hero glow to the hammer.
The arms intersect horribly with the shoulder pads in most animations, this will require some animating that might be difficult.
Add in some pupils, the paladin and Arthas's textures have some, it will make his eyes look less possessed mad man and more human.
The cloak starts out suddenly from the middle of his back, that looks weird.
He has iron pants, that must be hard to move in, but they do offer awesome protection for his junk.
Make the wings on his helm better - more detailed.
The lower mesh of the fore arm intersects with the upper mesh - it is visible even in the screen shot of the model - leave a little bit more distance between the two meshes.
The small parts of the cloak are connected to the bone of the arm - that is very weird.
Add some sort of trim at the end of the cloak and maybe to its sides, it will make it look better.
I suggest using the wings of the blood elf glue-screen texture for the wings on the shoulder.
Make the book a bit smaller.

I strongly agree with WhiteDeath on all these points, the texture wrapping is very good (except for those little high res / low res problems) but there are huge clipping problems.

- For the right forearm clash, just invert the two triangles of the armor part and it should work.
- You really have to fix the clashes with the right pauldron, this will require some work on anims, and you will probably have to create a new bone dedicated to the pauldron for that to work.
- The texture on his legs suggests a "knee" plate, but it is definitely not placed on his knees, it's way too high. Look at victory anim when his legs are bent, you will see what i mean.

For sure this will be a great model once you've polished it!

mmunier · Oct 8, 2013

it's just beautifull (if i don't speak english very well i am sorry but i am french)

knight26 · Oct 8, 2013

In game textures? and this awesome results?..
Dude, I think you just broke warcraft 3.

RazortheHedgehog · Oct 9, 2013

well done friend :3

Avex · Oct 9, 2013

Am I the only one who doesn't like the beard

HammerFist132 · Oct 9, 2013

Why that big filesize? Gj anyway

Uyarrr · Oct 9, 2013

omg awesome really!

Sunchips · Oct 9, 2013

I love the details on the hammer! Nice job pal

letgoit3 · Oct 10, 2013

paladinjst said:
thanks buddy . the most downloaded model is ur HQ Sylvanas . it can't be over by me .

you make cool models , after Varian and Tirion could make then pls Vol jin , Garrosh , Highlord Alexsandros Morgrain , MUradin BRonzebeard , Velen the Prohet it will be relly awesome

i know this will take a lot of time so just take your time and good luck :goblin_good_job:

btw nice model

letgoit3 · Oct 10, 2013

Footman16 said:
I reckon they're alright I mean Uther was a very hardened and determinded guy so I think the almost glaring look suits him quite well. That's just my opinion though.

so thats it foot man what do you think are these models good for your campaigns ? ^^ :grin:

PROXY · Oct 10, 2013

Please for gods sake, give the beard the mortar team texture. It looks just horrible with that one ^^

Everything else is awesome.

Jealot · Oct 14, 2013

Why is the one on the right wielding an ashbringer?

Footman16 · Oct 14, 2013

Because he is the Ashbringer.

EDIT: Forgot to add the dramatic Stormwind music and dun dun dun. Ah well.

Chen · Oct 14, 2013

Jealot said:
Why is the one on the right wielding an ashbringer?

He is Tirion and he should really wield that sword.

Rheiko · Oct 16, 2013

awesome

Renly Baratheon · Oct 16, 2013

Nice improvement from the regular Paladin.

CarloImperio · Oct 24, 2013

Awesome haha. I would put these on my melee maps. 5/5

Zaljinzoo · Nov 4, 2013

Gotta love models based off of the awesome old concept art! 5/5

leonguzman · Nov 9, 2013

wow sube los links de tirion

Kyrbi0 · Nov 9, 2013

Try English?

SilverhandPaladin

SilverhandPaladin (Model)

SilverhandPaladin (Model)

Moderator

Moderator

Gojira2000

Gojira2000

Roland

Roland

Similar threads